Hidrogarne CF-200E/NC C-Frame Hydraulic Press For Drawing, Stamping, Forming and Sintering Work

Hidrogarne CF-200E/NC C-Frame Hydraulic Press For Drawing, Stamping, Forming and Sintering Work

Machine Type: Customized Hydraulic Presses

Series: C-Frame

Description

The CF-200E/NC hydraulic press belongs to the CF/VR series and is custom-designed for deep drawing, stamping, die-cutting, and sintering operations.

Equipped with a top and bottom table made of machined C45E steel with DIN-650 slots.

It uses an optimized hydraulic system with a pressure below 270 Bar, ensuring prolonged durability and reliability in its performance.

It meets and satisfies all essential safety and health requirements according to CE regulations.

Structure and Tables

Features a goose-neck structure electros welded and made exclusively from S355JR steel.

Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision.

Calculated and designed using finite element software.

The top table ensures perfect alignment with four cylindrical side guides of 50 mm diameter, equipped with maintenance-free anti-friction bimetallic bushings.

Cylinder and Hydraulic Group

Main single-acting cylinder with sleeved jacket, chrome-plated piston, and maintenance-free anti-wear guides.

Two lateral double-acting cylinders with chrome-plated pistons and anti-wear guides for rapid approach and return speeds.

Includes two independent hydraulic safety blocks.

Motorized hydraulic group with pre-charge valve for approach and return. Fixed flow pump for constant speed operation.

Equipped with a directional valve, pressure limiting valve, decompression valve, and air-oil cooling system.

Glycerin manometer with tonne reading.

Electrical Installation and Safety

Includes a SIEMENS safety PLC model SIMATIC S7 1200 and a 7” touchscreen model KTP-700 CONFORT located in the electrical panel. Allows programming of operating modes in semi-automatic and automatic, power, stroke, and dwell time. Has a storage capacity of 300 recipes, with each recipe able to program all previous values.

Includes hydraulic cushion and ejector.

Electrical and hydraulic maneuvers are redundant and self-controlled. Includes an additional safety block and self-control devices for maneuvering and safety. Includes verification and certification of correct operation and safety distance for photoelectric cells.

Operation is performed via a low-voltage electric pedal.

For safety, it incorporates lasers and work area protection with category IV photoelectric barriers.

Technical Specifications

Power: tn 200

Engine Power: kW 11

Notch: mm 400

Working Speed: mm/s 5

Approach Speed: mm/s 98

Return Speed: mm/s 143.5

Maximum Pressure: Bar 270

Piston Stroke: mm 450

Lower Table: mm 900 x 650

Upper Table: mm 750 x 500

Maximum Vertical Light: mm 650

Working Height: mm 1.000

Total Front: mm 1.550

Total Side: mm 2.400

Total Height: mm 3.250

Weight: kg 8.500