1997 Demag ERGOtech System 500-200 Injection Moulding Machine
Sold
Description
1997 Demag ERGOtech System 500-200 Injection Moulding Machine
Machine Type: 50 Ton Injection Moulding Machine
Year: 1997
Control: Demag NC4
Technical Specifications
Clamping Force: 50 Ton (500kN)
Size of Platens (H x V): 460 x 460mm
Distance Between Tie Bars (H x V): 315 x 315mm
Mould Opening Stroke: 400mm
Mould Height: 210mm
Max Daylight: 610mm
Clamping Unit System: Single Clamp Cylinder
Intensification Ratio: 20.0
Screw Diameter: 25mm
Injection Pressure: 1995 Bar
Stroke Volume: 76cm³
Shot Weight: 69g
Injection Rate: 2010cm³/s
Screw Speed: 1/min
Plasticizing Rate: 21g/s
Nozzle Pressure: 60kN
Pump Motor Capacity: 15kW
Installer Heating Capacity: 8.3kW
Dry Cycle Number: 1/h
Reservoir Capacity: 145L
Machine Dimensions: 3700 x 1400 x 1800mm
Machine Weight: 3300kg
Specifications
| Manufacturer | Demag |
| Model | ERGOtech System 500-200 Injection Moulding Machine |
| Year | 1997 |
| Condition | Used |
| Serial Number | 7142-311 |
| Year | 1997 |
| Control | Demag NC4 |
| Clamping Force | 50 Ton (500kN) |
| Mould Opening Stroke | 400mm |
| Mould Height | 210mm |
| Max Daylight | 610mm |
| Clamping Unit System | Single Clamp Cylinder |
| Intensification Ratio | 20.0 |
| Screw Diameter | 25mm |
| Injection Pressure | 1995 Bar |
| Stroke Volume | 76cm³ |
| Shot Weight | 69g |
| Injection Rate | 2010cm³ |
| Screw Speed | 1/min |
| Plasticizing Rate | 21g/s |
| Nozzle Pressure | 60kN |
| Pump Motor Capacity | 15kW |
| Installer Heating Capacity | 8.3kW |
| Dry Cycle Number | 1/h |
| Reservoir Capacity | 145L |
| Machine Weight | 3300kg |