Alfra GmbH 4-Station Copper Machining Cart

Description
Alfra 4-Station Copper Machining Cart
Busbar machining compact and mobile - the 4-station trolley from Alfra offers stations for the functions bending, punching and cutting - intelligently and space-saving combined in a mobile work base. All units are located user-friendly at the same working height. Also part of the 4-station trolley are two additional hydraulic outlets for various applications. This allows you to connect an additional cylinder or a tool – for example for hexagonal pressing. Our new features for even more occupational safety: intervention protection, hold-down and emergency stop switch are located on both sides of the cart.
Product No: 03980.NG
Description
Used For
– bending busbars at 120 x 12 mm,
– for punching busbars Ø 6.6 - 21.5 mm,
– for cutting busbars 125 x 12 mm,
– two additional hydraulic outputs for various applications
- The processing stations for busbar cutting and hole punching and for cutting are recessed in the table. This enables quick, clean working
- You can use a hand wheel to infinitely variably raise and lower the universal working cylinder by hydraulic power according to the hole pattern to be punched
- The processing devices are connected to a hydraulic central unit fitted to the inside of the trolley
- A support extension, which can be pulled out of the side, is provided as a support for longer rails
- Press heads (e.g. press head 10 - 300 mm2 Prod.-No. 03360) and hydraulic cylinder Prod.-No. 02012 can be connected to 2 hydraulic hoses fitted to the side for hole-punching
- Hand Protection cover and installation of a hold down device - Optimized hold down device with better material guidance on both sides. Keeps copper bars on the table during the cutting process thus improving the cutting result significantly.
- Emergency Stop Function at Foot Switch
- Installation of an additional emergency stop switch on both sides of the trolley
- Improved hydraulic system inside of the trolley - Optimized hydraulic pipe routing
- 1 footswitch including connecting cable is included in delivery. Up to 3additional foot switches can be connected to the various stations
- 4 tool drawers with compartments for punches and dies are fitted to the trolley. It runs on 4 casters, 2 of which have a locking device.
Technical Specifications:
Motor voltage: 230 V / 50 Hz
Motor power: 2.2 kW
max. operating pressure: 700 bar
Flow rate: max. 1.7 l/min.
Tank volume: 3.2 l
Usable oil volume: 2.2 l
Weight approx.: 240 kg
Table size: 1,150 x 700 mm
Dimensions L x W x H: 1,250 x 760 x 1,210 mm
Required extra accessories
Punches and dies Ø 6.6 - 21.5 mm
Punches: Prod. No. 03204 - 03214
Dies: Prod. No. 03230 - 03240
Specifications
Manufacturer | Alfra GmbH |
Model | 4-Station Copper Machining Cart |
Condition | New |
Product No | 03980.NG |
Motor power | 2.2 kW |
Max. operating pressure | 700 bar |
Flow rate | max. 1.7 l/min. |
Tank volume | 3.2 l |
Usable oil volume | 2.2 l |
Weight approx. | 240 kg |
Table size | 1,150 x 700 mm |
Puncher | Prod.-No. 03204 - 03214 |
Dies | Prod.-No. 03230 - 03240 |