PLEASE CLICK ON THE PHOTOS FOR EXPANDED VIEW

  • CORMAK ERBM 10HV Section Rolls for pipes and profiles

    PRICE: €1,985.00 + Vat @ 23%

    MACHINE DESCRIPTION

    Electric bending machine for bending pipes and profiles, rods and flat bars depending on the used rollers. The machine is additionally equipped with a mechanical upper roller with a scale. The perfect solution when bending arcs, circles, spirals, etc. The set includes a foot pedal for controlling the left / right drive. Maximum range of tube bending up to 30 mm. The machine can used vertically and horizontally.

    MACHINE CHARACTERISTICS
    Hardened bending shafts made of special steel
    Great value for money
    Upper, mechanically adjustable pressure
    Ground and hardened guide rollers on the sides
    Position read out by the scale in millimetres
    The possibility of working vertically and horizontally

    TECHNICAL DATA
    Shaft diameter: 30 mm
    Motor power: 1.1 kw
    Working speed:8 rpm
    Dimensions: 950 x 800 x 1350 mm
    Weight: 230 kg

    CAPACITY
    Section on Flat:
    Max: 30 x 10mm
    Min Dia: 500mm

    Section on Edge:
    Max: 50 x 10mm
    Min Dia: 400mm

    Square Section:
    Max: 20 x 20mm
    Min Dia: 400mm

  • CORMAK ERBM35 Section Rolls for pipes and profiles

    PRICE: €2,565.00 + Vat @ 23%

    MACHINE DESCRIPTION

    Electric bending machine for bending pipes and profiles, rods and flat bars depending on the used rollers. The machine is additionally equipped with a mechanical upper roller with a scale. The perfect solution when bending arcs, circles, spirals, etc. The set includes a foot pedal for controlling the left / right drive. The machine can used vertically and horizontally.

    MACHINE CHARACTERISTICS
    Heavy and stable construction made of steel
    Infinitely adjustable side straightening rollers
    Left / right operation (controlled with the foot control)
    Rollers bending from durable and hardened steel
    Mechanical clamp of the upper roll
    Lower rollers with direct motor drive
    The possibility of horizontal and vertical work

    TECHNICAL PARAMETERS
    Shaft diameter: ø 30 mm
    Diameter of lower rolls: ø 118 mm
    Upper roller diameter: ø 148 mm
    Working speed: 3 - 6 rpm
    Motor power: 0.75 kw
    Weight: 220 kg
    Length: 600 mm
    Width: 800 mm
    Height: 1450 mm

    CAPACITY
    Section on Flat:
    Max: 50 x 10mm
    Min Dia: 800mm

    Section on Edge:
    Max: 80 x 15mm
    Min Dia: 700mm

    Square Section:
    Max: 30 x 30mm
    Min Dia: 900mm

  • CORMAK ERBM50 Section Rolls for pipes and profiles

    PRICE: €3,365.00 + Vat @ 23%

    MACHINE DESCRIPTION

    Electric bending machine for bending pipes and profiles, rods and flat bars depending on the used rollers. The machine is additionally equipped with a mechanical upper roller with a scale. The perfect solution when bending arcs, circles, spirals, etc. The set includes a foot pedal for controlling the left / right drive. The machine can used vertically and horizontally.

    MACHINE CHARACTERISTICS
    Heavy and stable construction made of steel
    Infinitely adjustable side straightening rollers
    Left / right operation (controlled with the foot control)
    Rollers bending from durable and hardened steel
    Mechanical clamp of the upper roll
    Lower rollers with direct motor drive
    The possibility of horizontal and vertical work

    TECHNICAL PARAMETERS
    Shaft diameter: ø 50 mm
    Diameter of rolls: ø 155 mm
    Working speed: 4 - 5 rpm
    Motor power: 1.5 kw
    Weight: 400 kg
    Length: 1000 mm
    Width: 750 mm
    Height: 1400 mm

    CAPACITY
    Section on Flat:
    Max: 60 x 10mm
    Min Dia: 500mm

    Section on Edge:
    Max: 100 x 15mm
    Min Dia: 450mm

    Square Section:
    Max: 35 x 35mm
    Min Dia: 900mm