Alfra GmbH 4-Station Machining Cart

Description
Alfra 4-Station Machining Cart
For
– bending busbars at 120 x 12 mm,
– for punching busbars Ø 6.6 - 21.5 mm,
– for cutting busbars 125 x 12 mm,
– two additional hydraulic outputs for various applications
The processing stations for busbar cutting and hole punching and for cutting are recessed in the table. This enables quick, clean working
You can use a hand wheel to infi nitely variably raise and lower the universal working cylinder by hydraulic power according to the hole pattern to be punched
The processing devices are connected to a hydraulic central unit fitted to the inside of the trolley
A support extension, which can be pulled out of the side, is provided as a support for longer rails
Press heads (e.g. press head 10 - 300 mm2 Prod.-No. 03360) and hydraulic cylinder Prod.-No. 02012 can be connected to 2 hydraulic hosesfiyted to the side for hole-punching
1 footswitch including connecting cable is included in delivery. Up to 3additional foot switches can be connected to the various stations
4 tool drawers with compartments for punches and dies are fitted to thetrolley.
It runs on 4 casters, 2 of which have a locking device.
Technical Specifications:
Motor voltage: 230 V / 50 Hz
Motor power: 2.2 kW
max. operating pressure: 700 bar
Flow rate: max. 1.7 l/min.
Tank volume: 3.2 l
Usable oil volume: 2.2 l
Weight approx.: 240 kg
Table size: 1,150 x 700 mm
Dimensions L x W x H: 1,250 x 760 x 1,210 mm
Required extra accessories
Punches and dies Ø 6.6 - 21.5 mm
Puncher: Prod.-No. 03204 - 03214
Dies: Prod.-No. 03230 - 03240
Specifications
Manufacturer | Alfra GmbH |
Model | 4-Station Machining Cart |
Condition | New |
Stock Number | 00224 |
Motor power | 2.2 kW |
Max. operating pressure | 700 bar |
Flow rate | max. 1.7 l/min. |
Tank volume | 3.2 l |
Usable oil volume | 2.2 l |
Weight approx. | 240 kg |
Table size | 1,150 x 700 mm |
Puncher | Prod.-No. 03204 - 03214 |
Dies | Prod.-No. 03230 - 03240 |