RHTC PPCD-80 C-Frame Press

RHTC Presses PPCD-80

Our 80 ton C-frame press is suitable for performing work involving deep-drawing, forming and stamping.

Equipped with a lower table with T-grooves, an adjustable piston stroke (with end-stroke switches), two speeds and a pressure switch. This 80 ton C-frame press has a manual and semi-automatic mode. Furthermore, you can operate the press by means of the two-hand push buttons.

These C-frame presses of RHTC consist of an electro welded structure made out of S355JR steel and are designed for stamping, die-cutting and forming / to incorporate in automated production lines. Made in Europe.

 These C-frame press models are equipped with a mechanized lower table with T-grooves. The cylinder is mechanized at the end to adapt tools and moulds. The cylinder stroke is easy to adjust with the end-stroke switches on the side of the presses. Operation of these PPCD-models is carried out by a two-hand push button with level IV security module. The safety for these C-frame models is guaranteed by two fixed lateral protection screens and a front opening of 600 mm. The control panel features a selector for manual or semi-automatic operation and a selector for the two different cylinder speeds (fast approach speed and slow working speed). It also contains a pressure switch and manometer.

Available in:

PPCD-50

PPCD-80

PPCD-100

PPCD-150

Technical specifications:

Force [tn]: 80

Motor power [kw]: 4

Throat depth [mm]: 290

Working speed [mm/sec]: 3.8

Approaching speed [mm/sec]: 19

Return speed [mm/sec]: 28

Maximum pressure [bar]: 320

Piston stroke [mm]: 250

Lower table size [mm]: 500 x 500

Max. vertical light [mm]: 400

Working height [mm]: 850

Total length [mm]: 1330

Total width (frontal) [mm]: 780

Height [mm]: 2090

Weight [kg]: 1750

Features:

Equipped with a lower table with T-grooves

The cylinder is mechanized at the end to adapt tools and moulds

The cylinder stroke is easy to adjust with the end-stroke switches

Manual / semi-automatic work mode

Two cylinder speeds

Pressure switch and manometer

Operation by two-hands push buttons

Optional accessories:

Geometry adapted to your requirements (for example a larger table, larger vertical light or larger piston stroke)

Higher speeds with a different pump

Hydraulic ejector

Punching tool-set for diameters from 6 up to 100 mm with anti-deformation elastic hold-down

415 mm folding tool-set (Promecam clamping system)

Cooling equipment for the hydraulic group by an air-oil cooling system

Mechanical regulation of the cylinder, only available for the PPCD-80 and PPCD-100