PLEASE CLICK ON THE PHOTOS FOR EXPANDED VIEW

  • Cormak G5010B Portable Bandsaw Single Phase

    PRICE: €690.00 + VAT @ 23%

    MACHINE DESCRIPTION

    Band saw for metal cutting with the possibility of cutting at an angle of 45 °.
    Thanks to the use of high-quality materials and construction solutions that have been tested for years, it is ideally suited for construction sites and for professional repair shops.
    The belt is guided on precision ball bearings which guarantees precise and silent operation without vibrations and extends the life of the cutting band.

    For cutting profiles, pipes, solid materials, plastics, etc.
    Convenient handle for easy transport.
    Automatic cut off - limit
    Quiet, vibration-free operation thanks to the use of high quality materials.
    The blade is guided on precision ball bearings

    TECHNICAL DATA

    Blade cutting size: 1470x13x.65 mm
    Motor: 1/2hp 50hz 1430rpm
    Blade speeds: 50 hz: 45 m / min; 60hz: 54m / min
    Package size: 715x370x458mm
    Weight: 29 Kg

    CUTTING CAPACITY
    0º:
    Round: ø105 mm
    Rectangle:100 x 150 mm
    Square:100 x 100 mm

    45º:
    Round: ø80 mm
    Rectangle:100 x 60 mm
    Square: 60 x 60 mm

    STANDARD EQUIPMENT
    Bi-metal blade
    Clamping vice
    Workpiece stop

  • Cormak BS170G Bandsaw - 3Phase or Single Phase

    PRICE: €1,510.00 + VAT @ 23%

    MACHINE DESCRIPTION

    The Cormak Bs 170g Band Saw, thanks to the hydraulic cylinder, cooling and swivel arm up to 60º, is widely used in locksmith workshops where precision, quality and cutting speed count.

    MACHINE CHARACTERISTICS

    Band Saw For Metals, Horizontal With A Swivel Arm, Allows Straight Cutting And At Any Angle In The Range From 0 To 60 Degrees.
    The cutting material can be fed manually or with roller tables. The blade feed is carried out by gravity on the principle of oil flow in a two-chamber hydraulic cylinder. The speed of the arm downfeed is controlled thanks to the regulating valve.
    The blade guides are equipped with a set of bearing rollers. This has a huge impact on the blade, its durability, straightness, accuracy and cutting quality.
    The appropriate cutting speed should be selected for particular types and grades of material.
    The rigid arm is made of profile cast iron. The control panel is located conveniently next to the arm.
    The drive from the electric motor to the driving wheel of the cutting blade is transferred by a motor with a mechanical gear (not a belt).
    The bandsaw blade is stretched on two cast iron wheels by means of a manual tensioner and guided by a set of bearing rollers.
    The base is built as a rigid body welded from steel sheets.
    Inside there is a separate coolant tank with an electropump. The shape of the upper part of the base is designed for draining the coolant and trapping swarf.
    In the cutting process, the main cutting motion is the movement of the cutting band and the feed rate of the arm drop. The speed of dropping the arm (cutting speed) is regulated by means of a hydraulic cylinder. The feed speed is adjusted on the control panel of the saw. In the lower position of the arm (after cutting the material) the blade drive is switched off automatically.
    Safety will be ensured by the blade guard and micro switches that stop the motor operation after the end of the cutting cycle or the opening of any of the covers, additional protection consists in the automatic cut-off of the motor in the event of the cutting band breaking.

    TECHNICAL DESCRIPTION

    Motor power:
    S1 100%: 1.1kw;
    S6 40%: 1.5 kw

    Adjustment of downfeed of arm: Hydraulic cylinder
    Length of blade:2085 x 20 x 0.9 mm
    Cutting speed: Stepless 0-50 m / min
    Blade speed: 36 m / min
    Height of the vice base: 890 mm
    Weight: 200 kg

    CUTTING CAPACITY (MM):
    0º:
    Round: ø170
    Rectangle: 170x120
    Square: 170x 170

    45º R:
    Round: ø120
    Rectangle: 120 x 110
    Square: 110 x 110

    60º R:
    Round: ø70
    Rectangle: 70 x 60
    Square: 60 x 60

  • Cormak MCB350HD Bandsaw - 3Phase

    PRICE: €3,325.00 + VAT @ 23%

    MACHINE DESCRIPTION

    Professional, very powerful and efficient bandsaw for metal with quick clamping and swivel arm in the range -45 ° to 60 °. Band saw is equipped with a blade tension gauge and bi-metal bandsaw blade.
    This machine is ideally suited for cutting pipes, profiles and solid materials.

    MACHINE CHARACTERISTICS

    The CORMAK MCB350HD with CE metal band saw enables straight cutting or at any angle in the range from -45 to +60 degrees. The material can be fed manually or through any feeding device. The arm is gravity fed on the principle of oil flow in a two-chamber hydraulic cylinder.
    The operator starts the machine by pressing the start button and sets the cutting speed. After the cutting is completed, the machine automatically stops and the operator lifts the arm manually to the starting position. The material is fed by hand. This machine can be used for both single part or serial production, and due to its robust design, it enables the cutting of a wide range of materials, including stainless steel, tool steel, solid materials and profiles.
    Mitre cutting is achieved by turning the arm to the left and right.
    The arm of the machine is made of a uniform cast iron casting and along with a 27 mm wide blade enables full multistage cutting of both profiles and solid materials.
    The vise is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and roller bearing system. It is CARBIDE GUIDES that are responsible for precision and straightforward cutting.
    The arm is equipped with an automatic blade tension sensor, it is inclined by 25 degrees, which increases the life of the blade. A swarf brush is attached to the bottom of the arm for perfect cleanliness and blade performance.
    The drive of the machine is transferred via a worm gearbox filled with gear oil. The machine has a three-phase motor with double winding and two cutting speeds. Motor thermal protection.
    This bandsaw has a very large cutting range at an angle of 45º to the left to 60º to the right. The machine has two cutting speeds of 32 and 72 m/min.
    The design: frame, vise and rotatable table are cast iron. Closed coolant system with distribution of fluid to the blade guide. The machine is equipped with a stop with a scale for setting the length of the material to be cut. The cutter has a TENSOMETER - a blade tension sensor and an automatic switch in case the cutting band breaks. Attached to the back of the machine is a roll that feeds the material to be cut.
    Safety during the cutting process is ensured by an electrical installation that meets all CE requirements.
    The machine has an end switch that stops the machine after finishing the cutting process, an emergency stop switch, a series of microswitches that switch the machine off when, (i.e) Cuts off if you open the belt transmission cover or cutting band guard.

    TECHNICAL DATA

    Minimum cutting diameter: ø5 mm
    Minimum length of material in vice: 100 mm
    Distance from the vice to the floor: 940 mm
    Dimensions of blade: 2950 x 27 x 0.9 mm
    Total power: 2.2 kw
    Blade speed: 36/72 m • min-1
    Diameter drive wheel / belt: 330 mm
    Dimensions: 2000 x 1330 x 2020 mm
    Weight: 600 kg

    CUTTING CAPACITIES

    0º:
    Round: ø270
    Rectangle: 350 × 240
    Square: 260 x 260

    45º R:
    Round: ø230
    Rectangle: 230 × 150
    Square: 210 x 210

    45º L:
    Round: ø200
    Rectangle: 200 × 170
    Square: 170x 170

    60º R:
    Round: Ø140
    Rectangle: 140 × 140
    Square: 140x140