Cormak S-200RHA Automatic Bandsaw
Description
Cormak S-200RHA Automatic Double Mitre Bandsaw
Machine Type: Automatic Double Mitre Bandsaw
Machine Description
Cormak S-200RHA automatic band saw is an incredibly efficient machine in automatic cutting of tubes, steel and cast iron profiles as well as non-ferrous metals. Rugged body and strong frame of the saw ensure great rigidity and stability during cutting even the toughest metals.
This machine allows for cutting manually at -30º- +60º and automatically at 0-45º. Manual mode enables performing all activities manually, using machine's control panel. Automatic mode – after machine is switched on, the whole cutting process is done without its operator's interference, that is, mounting cut detail in the vice, its repositioning to set dimensions, lowering the cutting arm as well as its raising to the specified height after the cutting process is finished.
Cutting parameters such as the number of cut details, their dimensions, cutting band speed and arm lowering speed are set on the control panel. Machine is stopped automatically when the cutting process is finished, the cutting band breaks or in the case of any other failure identified by the machine's operating system.
Machine's body is made of cast iron, mounted on a rigid, spatial housing construction made of plates. Inside the housing are: a hydraulic unit, a flood coolant container along with a pump and a chip container.
Cutting band drive is based on a motor controlled with an inverter, providing smooth adjustment of a wide range of speed. Hydraulic band tensioning ensures optimum cutting band working conditions. In the case of band breakage the machine stops automatically. Precise band guiding is achieved by guides with bearings and cemented carbide inserts. Band guiding movable head is set dependent on the dimensions of cut material, ensuring higher rigidity of the band. Maximum cutting parameters and long-term reliability of the blade are achieved due to a cooling system and a cleaning brush.
Forced hydraulic arm lowering is adjustable by an accurate throttle valve. Quick feed system makes it possible to shorten the cutting time of some elements. Hydraulic material feeding system enables fully automatic working cycle of the machine. Controller, equipped with an LCD screen, is capable of programming the operation of the blade, indicates absence of material, provides errors and informs about the number of cut sections according to the time set. Maximum material feeding length in one stroke measures 500 mm, with +/- 0.2 mm margin for each stroke.
The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability.
Technical Specification
Type: automatic
Arm lowering and raising: hydraulic with smooth arm lowering adjustment
Band speed: inverter 0-90 m/min
Cutting at angles: from 30° left to 60° right
Cutting angle range in Manual Mode: -30° to +60°
Cutting angle range in Automatic Mode: 0° to +45°
Vice: hydraulic
Minimum cutting diameter: Ø 5 mm
Minimum material length in the vice: 30 mm
Vice base height: 780 mm
Cutting band: 27×0,9×2910 mm
Total power: 4.1 kW
Dimensions (LxWxH): 2250×1600×1600 mm
Weight: 1100 kg
Cutting Capacities
Capacity 0º (Round): 250mm
Capacity 0º (Rectangular): 320 x 240mm
Capacity 0º (Square): 240 x 240mm
Capacity 30º L (Round): 200mm
Capacity 30º L (Rectangular): 220 x 120mm
Capacity 30º L (Square): 190 x 190mm
Capacity 45º R (Round): 220mm
Capacity 45º R (Rectangular): 235 x 120mm
Capacity 45º R (Square): 210 x 210mm
Capacity 60º R (Round): 110mm
Capacity 60º R (Rectangular): 155 x 110mm
Capacity 60º R (Square): 100 x 100mm
Standard Supply Scope
Control panel on separate component
Built-in hydraulic unit
Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed adjustment
Arm position memory function (arm returns to a defined height after cutting)
Automatic cutting at 0° - 45°
Manual cutting at -30 - +60°
Brush for cleaning the band
Cooling system
Bi-metal saw blade
EC Declaration of Conformity
User manual
Specifications
Manufacturer | Cormak |
Model | S-200RHA Automatic Bandsaw |
Condition | New |
Machine Type | Automatic Double Mitre Bandsaw |
Type | automatic |
Band speed | inverter 0-90 m/min |
Vice | hydraulic |
Minimum cutting diameter | Ø 5 mm |
Vice base height | 780 mm |
Cutting band | 27×0,9×2910 mm |
Total power | 4.1 kW |
Dimensions (LxWxH) | 2250×1600×1600 mm |
Weight | 1100 kg |
Capacity 0º (Round) | 250mm |
Capacity 0º (Rectangular) | 320 x 240mm |
Capacity 0º (Square) | 240 x 240mm |
Capacity 30º L (Round) | 200mm |
Capacity 30º L (Rectangular) | 220 x 120mm |
Capacity 30º L (Square) | 190 x 190mm |
Capacity 45º R (Round) | 220mm |
Capacity 45º R (Rectangular) | 235 x 120mm |
Capacity 45º R (Square) | 210 x 210mm |
Capacity 60º R (Round) | 110mm |
Capacity 60º R (Rectangular) | 155 x 110mm |
Capacity 60º R (Square) | 100 x 100mm |